AWA Marconi P1 Television
P1 1965 - 1972The P1 was a series of 11 inch portable televisions that were available from 1965 to 1972 when Japanese models took over.
The P1 series was revised a number of times throughout its run with the most notable change being the CRT.
The P1 originally had used an 11LP4 CRT. This was updated to a AK11X2 CRT that had somewhat flatter front face necessitating a change to the bezzel. Both had 110 degree deflection.
The television tuned all 13 Australian frequencies, and was originally available with a Red, White, and Blue plastic back. The Red and Blue had matching front speaker grills, while the white set had a grey speaker grill. Later sets were only available in Blue.
AWA rebadged the P1, as per the B15 radios. There were Westinghouse and Electrice badges. I have seen the Westinghouse badged ones, but never an Electrice.
These were robust and popular sets. I remember my parents hiring me one when I was in hospital during the mid 1970s.
They are fairly easy to find. I've had two examples a red and blue example. Both cost less than $10 each.
The red example I gave to my friend Peter from the HRSA and we both fixed the blue one.
The biggest issue are the main filter caps. Once these were replaced the blue set sprang to life. The sound was good on the red set and Peter subsequently got the picture working.
This is more of a display set and would require quite a few more capacitors for a good picture. I no longer have a working video machine or set top box with vhf output (I have UHF ones) so it sits on the shelf looking good!


The AWA P1 family of portables are a complicated lot!
There are three different coloured cases available, blue, red and white.
There are also at least 5 model variants: P1, P1P, P1Q, P1T and P1Y. There could possibly be more but the ones listed are ones I can confirm.
The P1 was the first followed by the P1Y. Next seems to the the P1T and the last two are the P1Q and P1P.
The major difference between the early P1 and late P1 models is the CRT and front case bezel. The early models use a 11TP4 CRT while the later models use an AK11X2 CRT. The AK11X2 CRT has a much flatter CRT face and the front case was changed to match it. The later CRT also differs by having the EHT anode connection at the top of the CRT while the earlier one was at the right hand side.
Another difference was in the PCB artwork. Early models had a dark brown PCB with blue artwork. Later models had a light brown PCB with green artwork.
Minor circuit changes also occurred. The most obvious change was deleting the top linearity preset control (replaced by a fixed resistor) and a simpler video output circuit. At some stage, a 3 wire mains lead was used with an earthed chassis instead of the earlier 2 wire double insulated design. Chassis number types that I'm aware of are the 46-00, 46-02 and 46-05.
The most accurate way to tell the difference between variants would be by the serial number of the TV but at this stage I don't have enough serial numbers matched to models to be accurate. What I do know is a P1 with a serial number starting with Y, three P1T models with B series numbers and a P1P with a FL series number.
The TV collector - vintage-radio.com.au
Page last updated - July 2025
Browse our categories
Learn more about us